PDA

View Full Version : Mutiviewing from Series 3


gshatto
12-04-2007, 09:38 PM
I just purchased 2 Tivo Series 3.

I have one Tivo Series 3 connected to a Non HD TV. Second Tivo Series 3 is connected to a HD TV in another room.

Tivo connected to Non HD TV which has a fixed format of 480P will be used to record HD contact and then transfer recordings to TIVO SERIES 3 in other room connected to HD TV.

My question is. Since format is fixed on Non-HD TV in room and will be used to record HD programming will it be HD recording when I transfer to other TIVO connected to HD TV with a format of 1080i. Do I lose HD content transfer from fixed 480I non hd Tv to Series 3 connected to HD tv with 1080p or native content.

WK-Michael
12-04-2007, 09:48 PM
The recordings are all the same either way. You're only setting the output format at 480i when you set that - that has nothing to do with the way the shows are recorded.

gshatto
12-20-2007, 12:42 PM
Thanks for the information. I thought I messed up. I had to purchase a new TV to be able to connec the HD outputs of TV interface. Our old T.V. did not have cable connects. I was concerned I would have to go out and purchase a HD for the Bedroom. We have a Big Screen HD in the living room.

Thanks again.