Announcement

Collapse
No announcement yet.

Using SWM-2 Connection

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Using SWM-2 Connection

    I have a bit of a long run to the IRD's (150 ft ish) and have 2 RG-6 cables available. So I am thinking about running the SWM-1 output to the Power Inserter and terminating. Then run the 1x8 splitter off of the SWM-2 output. This would save the connector loss through the PI. Will that work? Or do I have to hook the IRD's to the SWM-1 output?

  • #2
    150' is an acceptable distance with a 1x8 splitter; I'd recommend that you do it all off of SWM1 and see if it works.

    Comment

    Working...
    X