Announcement

Collapse
No announcement yet.

SWM-LNB Wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SWM-LNB Wiring

    Can I install a splitter between the Dish and the Power Inserter on a SWM-LNB? I want to be able to split the signal wire on the roof near the dish and send the signal to two apartments. I know that a SWM-8 will work, but I would prefer to use a SWM-LNB. I have tried searching and checked the wiring diagrams but did not see anything that matched.

    Thanks in advance.

  • #2
    Yes, just be sure the power inserter is connected to the power-passing port on the splitter.

    Comment


    • #3
      you can also stack two four splitter one for each appartment if you wanted too.

      Comment

      Working...
      X