Results 1 to 3 of 3

Thread: Directv TIVO R10

  1. #1
    Join Date
    Apr 2019
    Posts
    2

    Default Directv TIVO R10

    Have an R10 with locals in the Minneapolis St. Paul area.

    Locals and locals only have been pixelated for the last few days.
    Swapped Sat 1 and Sat 2 cables. No difference.
    Swapped LNB with a spare. No Difference.
    After swapping Sat 1 and Sat 2 cables and putting the original LNB back, locals are now complete black and getting Searching for Satellite 2 sometimes both Satellite 1 and 2.

    All other channels appear fine and it is successful recording one show while watching another.

    Not sure what to try next.

  2. #2
    Join Date
    Apr 2019
    Posts
    2

    Default

    Also, checked signal strength before and after swapping Sat 1 and Sat 2 and swapping LNB.

    All signal strengths are above 94 on all transponders, for both Sat 1 and Sat 2, except.

    Transponder 4 shows zero on Sat 1 and Sat 2
    Transponder 18 shows zero on Sat 1 and Sat 2
    Transponder 26 shows 38 on Sat 1 and 40 on Sat 2
    Transponder 28 shows zero on Sat 1 and Sat 2

  3. #3
    Join Date
    Nov 2006
    Location
    Los Angeles, CA
    Posts
    6,854

    Default

    Have you tried pressing the red "reset" button inside the access card door?
    Find us on Twitter and Facebook

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •