Announcement

Collapse
No announcement yet.

Directv TIVO R10

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Directv TIVO R10

    Have an R10 with locals in the Minneapolis St. Paul area.

    Locals and locals only have been pixelated for the last few days.
    Swapped Sat 1 and Sat 2 cables. No difference.
    Swapped LNB with a spare. No Difference.
    After swapping Sat 1 and Sat 2 cables and putting the original LNB back, locals are now complete black and getting Searching for Satellite 2 sometimes both Satellite 1 and 2.

    All other channels appear fine and it is successful recording one show while watching another.

    Not sure what to try next.

  • #2
    Also, checked signal strength before and after swapping Sat 1 and Sat 2 and swapping LNB.

    All signal strengths are above 94 on all transponders, for both Sat 1 and Sat 2, except.

    Transponder 4 shows zero on Sat 1 and Sat 2
    Transponder 18 shows zero on Sat 1 and Sat 2
    Transponder 26 shows 38 on Sat 1 and 40 on Sat 2
    Transponder 28 shows zero on Sat 1 and Sat 2

    Comment


    • #3
      Have you tried pressing the red "reset" button inside the access card door?
      Been here a long time . . .

      Comment

      Working...
      X