Announcement

Collapse
No announcement yet.

Incorrect Command Prompt

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Incorrect Command Prompt

    I've been trying to get my 80GB moved to a 160GB over the pass 2 weekends. Everytime I try no matter what configuration I put the drives in the boot up process does not see the FAT32 partitions on both the tivo and Seagate 160GB drives I have. It will pick up the drive with my windows install with the ntfs check it runs.

    Anyway when the boot process finishes I get the command prompt "DRDOS A:\>" and not the weaknees # prompt. None of the commands work. This happens regardless of the configuration. I'm using the mfstools 2.0 with large kernel support. I can got to the fat32 check and ran it again but it can't see them. What am I doing wrong?

  • #2
    You don't seem to really be booting from the CD. Before you connect any TiVo drives to the PC, you need to be sure you are booting from the CD, otherwise you can damage the TiVo drives.

    Try booting with only your CD drive connected.
    Been here a long time . . .

    Comment

    Working...
    X