Originally posted by [email protected]
View Post
Announcement
Collapse
No announcement yet.
Upgraded HD and now have connection issue
Collapse
X
-
Replaced hard drive. TV screen shows "welcome powering up".
Nothing happens.
Leave a comment:
-
Yup - TiVos can be really finicky with anything but the TiVo brand adapters. And the newer TiVos will ONLY work with the newer adapters.
Leave a comment:
-
The Tivo adapter did the trick (with a little hand holding). I removed the D-Link adapter and plugged in the Tivo adapter then restarted the system (unplugged it and plugged it back in).
The Tivo adapter did not see any SSID that the D-Link could show. However, I manually setup the Tivo with my SSID and password/network key and it connected! (:
Leave a comment:
-
Tivo is a TCD24004A the wireless adapter is a D-Link DWL-122.
I have picked up a Tivo wireless G adapter at Best Buy. I will try it later tonight and see if it works. I'm hoping it's a firmware issue and for whatever reason the new drive does not like my D-Link adapter.
Leave a comment:
-
Upgraded HD and now have connection issue
I installed a single HD upgrade and now I can not connect to my local network and complete the guided setup.
The Tivo can see my network SSID and prompts for my password. Then after a few minutes I receive a "could not connect to wireless network "abc" (N06)
I have tried changing the SSID. Changing the password/network key. Removing the password, etc. and receive the same error each time.
I have tried using the phone line and the Tivo states there is not a dial tone. However, I think this might be due to using a VOIP service.
Any ideas or help would be much appreciated.
Thank you,
BrentTags: None
Leave a comment: