Announcement

Collapse
No announcement yet.

No output / no "orange light" when remote activated

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No output / no "orange light" when remote activated

    I have over a two year old single tuner Tivo TCD 540040. While reconnecting it to a new LCD TV...I saw the "Tivo lost signal screen with the various suggested solutions screen..ie change channels etc". However it was very snowy and a loud buzz.. Then screen went to blue. Lost signal from TIVO

    Tried this TIVO with other TV's and cables. No go.

    No signal coming out of this TIVO.

    While the green light is still comes on in the front panel...activating the remote does not cause the orange light adjacent to green... to flicker on also??.

    Tried all outputs and nothing..and my LCD TV says "No signal/input"

    I purchased a new Weeknees power source and that too made no difference. The key clue would seem to be the lack of the flickering orange light next to the green panel power light. What would cause that? I have hooked other TIVOS up to same set and no problem with them. Multiple power sources and still no output..just the blue screen

    Any suggestions?

  • #2
    Please see the other two threads . . .
    Been here a long time . . .

    Comment

    Working...
    X