Announcement

Collapse
No announcement yet.

Upgraded HD and now have connection issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgraded HD and now have connection issue

    I installed a single HD upgrade and now I can not connect to my local network and complete the guided setup.

    The Tivo can see my network SSID and prompts for my password. Then after a few minutes I receive a "could not connect to wireless network "abc" (N06)

    I have tried changing the SSID. Changing the password/network key. Removing the password, etc. and receive the same error each time.

    I have tried using the phone line and the Tivo states there is not a dial tone. However, I think this might be due to using a VOIP service.

    Any ideas or help would be much appreciated.

    Thank you,
    Brent

  • #2
    What exact Wifi adapter are you using? What model TiVo is it?
    Been here a long time . . .

    Comment


    • #3
      Tivo is a TCD24004A the wireless adapter is a D-Link DWL-122.

      I have picked up a Tivo wireless G adapter at Best Buy. I will try it later tonight and see if it works. I'm hoping it's a firmware issue and for whatever reason the new drive does not like my D-Link adapter.

      Comment


      • #4
        The Tivo adapter did the trick (with a little hand holding). I removed the D-Link adapter and plugged in the Tivo adapter then restarted the system (unplugged it and plugged it back in).

        The Tivo adapter did not see any SSID that the D-Link could show. However, I manually setup the Tivo with my SSID and password/network key and it connected! (:

        Comment


        • #5
          Yup - TiVos can be really finicky with anything but the TiVo brand adapters. And the newer TiVos will ONLY work with the newer adapters.
          Been here a long time . . .

          Comment


          • #6
            Replaced hard drive. TV screen shows "welcome powering up".
            Nothing happens.

            Comment


            • #7
              Originally posted by hlsolo@hotmail.com View Post
              Replaced hard drive. TV screen shows "welcome powering up".
              Nothing happens.
              Did you properly format the drive with the OS for your exact model TiVo?
              Been here a long time . . .

              Comment

              Working...
              X